VIV 100-01 Lily Outflow 10mm

Description

Usage

Use a new filter hose when connecting to the filler, as old ones tend to be less flexible and may come loose easily,

Please insert PIPE connection part more than 2cm into the filter nose. In case it is hard to connect, making the hose and PIPE wet with water makes the operation ease Attach the suction cup firmly to the tank surface.

Should any oily film appear on the surface, adjust the position of outflow pipe so that the opening is close to the surface:

In case of oxygen shortage, adjust the position of Outflow PIPE so that 1/3 of the opening part is above the surface. This enables the PIPE to act as an aerator

Maintenance

Cleaning with Glass cleaning agents in necessary when algae begins to accumulate on the PIPE

Make a solution with Glass cleaning agents and submerge the GLASS PIPE with suction cups and filter tube removed. It takes 30 minutes to few hours to be cleaned depending on the algae condition.

If algae cannot be removed completely, use SPRING WASHER, which is a brush specially made for the cleaning of glassware.

Wash the glass with tap water until the slime and odor disappears. The SUPERGE solution is harmful to fish and plants. Be sure to thoroughly wash away any residue and your hands after maintenance.

Caution

This product is designed for growing and maintaining aquatic plants and tropical fish in an aquarium. Please do not use this product for improper purpose

Read this instruction manual carefully and follow its direction for using this product

This product is made of glass Dropping or being subject to shock or sudden pressure may cause breakage.

This product cannot be repaired. When disposing the damaged product, be careful not to cut yourself, arid dispose according to the local regulation.

Do Not use boiled water for cleaning as it may cause breakage VIV can not be responsible for any death and/or disease of aquatic pants or organism

KEEP OUT OF REACH OF CHILDREN